I need help with...

The Energy Information Administration projects heating bill hikes ranging from 31 percent in the Northeast to 71 percent in the Midwest. Electricity prices could rise as well, as almost one-fifth of electricity is generated using natural gas.

While it's no secret that you'll be spending more to heat your home this winter, if you take measures to conserve energy, you can significantly minimize the impact. Here are my top 10 energy savings tips:

Service your heating system

This is my number one rule. By paying a service technician $75 to $100, depending on where you live, he or she will clean the unit and replace filters in the furnace and humidifier, thus insuring that the equipment is running at its most cost-efficient and optimum capacity. This should be done annually.

Install a programmable thermostat

A recent study revealed that only 24 percent of Americans have installed this handy device - for shame! Well-insulated homes can save up to 30 percent on heating costs with one. You can program these thermostats to automatically lower temperatures when at work or while sleeping, thereby saving energy hours at a time. Prices for programmable thermostats range from $40 to $100, and will quickly pay for themselves.

Add weather stripping around windows and doors

Use of door thresholds, window caulking and plastic window film can go far in saving your money this winter. If you live in a drafty home, you could save up to 20 percent with an investment of as little as $25. One product to consider is a product called Windjammer (Ace no. 1200989), a clear, weatherproof gel that dispenses from a can and seals drafts. What's more, it can be easily removed at the end of the season.

Install ceiling fans in your home

Running the fans slowly and in reverse will keep warm air circulating throughout the house, thereby reducing running time for the furnace. Ceiling fans add a nice decorative touch as well.

Check furniture arrangement in your rooms

Are you unknowingly blocking vents and radiators with a big sofa or armchair? If so, you're restricting the airflow in your home, resulting in higher output from your furnace or boiler. Rearranging the furniture can save your units from having to work overtime.

Install a tankless water heater

I always remind people that this amazing technology has been around for 70 years, yet U.S. homeowners have been slow to adopt it. These days, units are less expensive, and by creating hot water on demand as opposed to continuously heating stored water, homeowners can save hundreds of dollars over time.

Be smart about setting the temperature

Homeowners can save up to 3 percent on energy bills simply by turning down the thermostat just one degree. You won't even notice the change in temperature, but your heating bill will.

Install thermo-pane windows in your home

These multi-pane windows can have R-values of as high as 9.1. The higher the R-value, the more resistant the glass is to losing heat. Conversely, your typical single pane glass has an R-value of 1. The difference is an increase in energy efficiency of up to 70 percent.

Properly insulate your ceilings and attic

Heat rises, and if there isn't enough insulation in the space above, your money literally is going out the roof. Most ceilings and attic spaces should have at least an R-30 rating, although some areas of the country recommend an R-40-50 rating.

Let the sun be your guide

It's free energy! During the day, open up drapes and blinds and let the sun heat your home. At night, draw the curtains to keep the heat inside.

Credit:  Lou Manfredini's Tips From the Tool Box, Ace Hardware

Chances are, when you open your monthly utility statements, you're witnessing energy costs doubling and even tripling at the height of the season. Many homes, particularly those built more than 10 years ago, do not feature the latest energy-saving techniques and products. By spending just a few dollars and doing some simple projects, you can save energy - and significant amounts of money. Here are five fast fixes to help you start saving:

Lower Your Lighting Costs

Start with this easy task: Replace current light bulbs with energy-saving compact fluorescent (CFL) bulbs. They screw in just like standard bulbs, but use a fourth of the energy and last up to 10 times longer. An 18-watt CFL bulb provides as much light as a 75-watt standard light bulb. Average savings: $10 - $50 per year

Taming the Toilet

A constantly-running toilet can use up to 8,000 gallons of water each year. Fix the problem by installing a toilet repair kit that features a new valve, flapper and other devices that will conserve water. Average Savings: $25 - $100 per year

Fix Leaky Fixtures

Aside from causing that annoying "drip," leaky faucets can also cause a spike in your water bill. Replacing the aerator and rubber washer will cost you pennies yet save you dollars in the long run. As for the showerhead, consider installing a flow-restricting model - a family of four can conserve 10,000 gallons of water per year going this route. Average Savings: $100 - $300 per year

Hot Water Help

Your water heater may be working harder than it needs to, costing you precious dollars. Reduce the temperature on the unit to about 120 degrees - the water doesn't need to be any hotter. If the unit is older than 12 years, you may want to look into replacing it with a new, more energy-efficient model. Average Savings: $20 - $50 per year

Install a Programmable Thermostat

Installing a programmable thermostat can significantly reduce energy costs, especially in the winter and summer months. Programmable models allow you to automatically adjust the temperature throughout the day, creating a specific energy-saving 'program' for weekdays and weekends. Some models even allow you to set preferences on the hour for each day of the week. Average Savings: $125 - $350 per year and up

Credit: Lou Manfredini's Tips From the Tool Box, Ace Hardware

• Remove your old threshold. You may need to use a chisel or a pry bar. Be careful to avoid damaging your floor or trim.

• Vacuum or sweep the floor to remove any dust and debris.

• Measure the width of your door opening, as well as the distance between the bottom of your door and the floor.

• Cut your new threshold to fit the width of your door opening.

• If necessary, notch your threshold so that it fits around any stops on the doorframe.

• Caulk the doorway between the door frame. This will ensure that your threshold has an airtight seal.

• Tap the new threshold into place with the sloped edge facing away from the house.

• Drill holes in the threshold that are slightly narrower than the nails you plan on using to secure the threshold to the floor.

• Nail the threshold into place.

• Fill the holes with wood filler and sand when dry.

• Apply stain and/or a varnish to seal the threshold against moisture.

Check your state and local codes before starting any project. Follow all safety precautions. Every effort has been made to ensure the accuracy and safety of this information. Neither Westlake nor any contributor can be held responsible for damages or injuries resulting from the use of the information in this document.

Many people prefer the doorjamb weatherstrip. It works on metal with screws or wood with nails. Unlike the v-strips, foam strips or felt, these can't fall off.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

Most of us do more in our garages than merely park our cars, so it makes sense to take some steps to better insulate it from the extreme heat and cold.

Your garage door is a potential large source of heat loss. If you have an uninsulated metal garage door, it can transmit heat and cold into your garage and home. A garage door insulating kit can make a big difference and keep you warmer in the winter and cooler in the summer. The kit comes with the insulating panels, fasteners, adhesive and everything you need. And only takes an hour to install.

Garage door weather stripping fills the gap around the edge of your garage door on the exterior side of the door. It keeps out drafts and is easy to install. The most common types of garage weather stripping have either a hard plastic or aluminum nailing strip with a soft, flexible vinyl or rubber piece attached to it. It's designed to limit air flow into the garage while providing a flexible seal that allows the garage door to move up and down while the weather stripping maintains positive contact with the door.

Check your state and local codes before starting any project. Follow all safety precautions. Every effort has been made to ensure the accuracy and safety of this information. Neither Westlake nor any contributor can be held responsible for damages or injuries resulting from the use of the information in this document.

According to the U.S. Environmental Protection Agency (EPA) the air inside our homes may be two to five times more polluted than outdoor air. What's surprising is that this statistic does not exclude newer homes, which can actually test higher than older residences in terms of poor indoor air quality.

In a rush to conserve energy in the 1970s, builders, architects and designers began building tighter homes with energy efficient windows and doors and thicker insulation in an effort to seal out potential drafts. While we succeeded in lowering the cost of energy bills, we ended up adding to the problem of trapping volatile organic compounds (VOCs) - harmful fumes caused by leftover building products, furniture, animal dander, and indoor mildew and mold - inside our homes.

Today, Americans spend millions of dollars each year on indoor air filtration systems. We purchase everything from small, tabletop models to whole-house units for our homes. And yet, even with all the information available on the market, there is major debate on which ones truly work the best.

Below are five steps that you can take to improve your home's indoor air quality. By following these steps and coupling them with the right indoor air purifying unit, you'll breathe a lot easier in your own home.

Step One -- Test your home for possible contaminants.

Today, there are a number of in-home test kits available to assess everything from lead on walls and in your drinking water, to asbestos and radon gas. And utilizing these inexpensive kits can give you the peace of mind of knowing that you and your family are safe.

Step Two -- If you have a forced air heating system, have the air ducts cleaned regularly and upgrade to better furnace air filters.

Homeowners often ask, "Is cleaning my air ducts worth it?" The answer is yes. Even if your home is new, you may have more internal construction debris and dust than a home that is 10 to 15 years old. When getting your air ducts cleaned, make sure the contractor is a member of the National Air Duct Cleaners Association (www.nadca.com), and uses not only high velocity air, but a whip that is fed through the ductwork to loosen any debris stuck to the walls of the sheet-metal. The average cost to clean ductwork in your home is about $300 to $500, but the results are well worth the expense.

In conjunction, for many of us, the furnace filter is a spun glass filter that costs less than a dollar. While this filter will protect the blower motor, it will do next to nothing when it comes to improving your indoor air quality. Upgrade to a pleated filter that captures smaller particles so small that even the naked eye cannot see. The key is to change them regularly - every couple of months should do - to prevent to the restriction of airflow through your heating system.

Step Three -- Keep your home as clean as possible.

According to the Asthma and Allergy Foundation of America (AAFA), an estimated 57 million Americans suffer from severe allergies and asthma and keeping your home as clean as possible can dramatically improve the air you breathe. Dusting window treatments, around window and door trim and those out-of-reach areas can make a huge impact. Use a bagless vacuum cleaner that utilizes a HEPA filter to maximize your cleaning power and avoid the plume of dust that occurs when you'd otherwise change the bag.

Step Four -- Consider purchasing an indoor air purifier.

Because they can vary in performance, size and cost, it's important that you find the right purifier to fit your needs. There are a number of Web sites you can turn to for help. One of the industry standards is put forth by the Association of Home Appliance Manufacturers' (AHAM) Air Cleaner Council (www.aham.org). There, testing helps set certain parameters so that all purification units are measured against the same criteria. If you're thinking of a particular model and in search of its product rating guide, visit www.cadr.org for the unit's "clean air delivery rate." In turn, take advantage of the 30-day free trial offer many manufacturers offer. By the end of 30 days, you'll know if you are breathing easier and if the unit is worth the investment.

HEPA filtration (High Efficiency Particulate Air) is one of the most common approaches to cleaning the air. A good quality HEPA filtering system can be up to 99.97 percent efficient at filtering particulates that are 0.3 microns from the air. This filtering system has been widely used and accepted by organizations promoting indoor air quality standards to clean the indoor air of smoke, dust, pollen, mold spores and pet dander.

Portable units, when sized correctly, can do a good job of cleaning the air in a particular room. But the key is to make sure that unit is sized for the square footage of that room. In addition, the faster the fan runs, the more air is exchanged through the unit. While this does increase the noise, the units will work much better.

HEPA room purifiers can range in price from $30 to $300. These units use a modular filter system which makes finding and installing the filters much easier.

Step Five -- Protect your family by installing a carbon monoxide detector.

It used to be that smoke detectors were enough to protect your family. However, in recent years, homeowners across America have been taking safety a step further by installing carbon monoxide detectors in their homes.

When installing a carbon monoxide detector, remember that the placement of that detector is key. The Consumer Product Safety Commission (CPSC) recommends it be located near the sleeping area, where it can wake you if you are asleep; however, additional detectors on every level and in every bedroom of a home provides extra protection.

Credit:  Lou Manfredini's Tips From the Tool Box, Ace Hardware