I need help with...

A basin wrench is a tool designed especially for that.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

Most faucets are washer-type, and if these are leaking from the spout, you will have to replace the washer.

If the seat is corroded, you will have to dress it or replace it.

If it is leaking from the handle, you may need to replace the O-rings, tighten the packing nut or replace the packing.
If a disk faucet is leaking, you will need to replace the O-ring.

If it is leaking from the spout, you will need to replace the disk assembly. For ball-type faucet leaks, you may need to replace the cam assembly, the seat assembly and the ball.

To be sure you have thought of everything, make a checklist and begin your repairs.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

These are applied to a pipe and fitting before applying the solvent weld glue to ensure a strong bond. Their use is always a good idea, especially if it's for a water supply line or the connection is going to be somewhere that will be difficult to get to in the future.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

Use a seat wrench, which has several sizes of square and hex ends.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

Going "green" in our everyday lives is all the rage these days. From CFL bulbs to organic cotton T-shirts, it seems everyone has some skin in the eco-game. Your family - and in particular your home - should be no different. Below are 15 easy do-it-yourself projects that will save you money, reduce your environmental footprint and have you playing your eco-part in no time.

1. As the cost of energy continues to rise, there is a way to lower your electric bills. Compact florescent light bulbs, or CFLs, use up to 66 percent less energy than conventional incandescent bulbs and can last up to five years. Replacing the five most-used bulbs in your home can save you up to $60 a year on your electric bill.
2. Your water heater can do a better job keeping the water in the tank hot if you buy it a jacket. Insulating jackets can be installed on most conventional water heaters and reduce the number of times a water heater "fires" during standby. In fact, 20 percent of your energy cost to heat water is used up during standby!
3. Fix that leak! Did you know that a dripping faucet or leaking toilet can waste up to 20 gallons of water a day? Repairing these leaks takes just a little time, and a small investment for the parts needed. The payback - both in dollars and for the environment - is huge!
4. Adding a rain barrel to your drainage system can help you capture some of the water Mother Nature sends us during rain showers. A 1,000 square foot roof can shed up to 650 gallons of water during a 1-inch rainfall. By placing a rain barrel under a down spout, you can use this water for your lawn, garden or even a car wash.
5. Plant a tree and reduce the carbon footprint of your home. To counteract the footprint from the use of electricity and natural gas or oil in the average American home, you would need to plant 42 trees... while that's a lot of green, start slowly to help shade your home and absorb carbon dioxide from the air.
6. Using a ceiling fan can not only help you feel more comfortable in your home, both in the winter and the summer, it can also help to lower your energy bills. By circulating the air in your home, your furnace and air conditioner will run less, which means savings for you.
7. Cutting your lawn just got a lot greener with Earth-friendly mowers. Gas-powered mowers are terrific for larger lawns, but if you have a smaller space to take care of, an electric or new cordless mower can do the trick, and with no fuel or harmful emissions. Mother Nature will thank you!
8. Composting is a great way to reduce your waste and your impact on landfills. By collecting and placing compostable materials in a collection bin, you can create a super-charged natural fertilizer for your garden.
9. Natural cleaning products have come a long way. You now have a choice to use products that lessen their impact on the environment. Many of these new cleaning items have natural ingredients and use less water during shipping to reduce fuel use.
10. Tankless water heaters are here to stay, and are a viable choice when it comes to installing a new water heater in your home. Standby energy use is completely eliminated, and you will never run out of hot water from a properly-sized unit!
11. Reduce your usage. How many cups of water do you boil for a cup of tea? Do you leave the TV or lights on when you leave the room? Does the water run from the faucet when you brush your teeth? These small changes in your lifestyle can make a difference for all of us!
12. Did you know that almost 25 percent of water used in the home is for showers, and each member of a family of four taking a 5-minute shower can use up to 700 gallons a day? By installing low-flow shower heads, you can reduce that use by almost half, and with new technology, still feel a brisk force from the water.
13. Stop all the leaks in your home! Drafty windows and doors can greatly raise your energy consumption. According to the EPA, if you caulk or seal those air leaks with weatherstripping, you can reduce greenhouse gas emissions by 1,000 pounds a year.
14. Let the sun shine! Not only will it brighten your mood, it will keep you from flipping the switch. In the colder months, the rays from the sun can help to heat your home, and the best part of this tip: it's absolutely free!
15. Your indoor air is three times more polluted than the outdoor air. While painting is a great way to liven up your living environment, make sure you are not harming it during the process. Low VOC or zero VOC paints work just as well and are a great choice for those with allergies, asthma or homes with young children.

You need a trap to shut off odor (sewer gas) from coming into the kitchen and bath area.

Be sure you use the right size for your sink.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

An aerator diffuses the water to prevent splashing.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

The 4" lavatory faucet without a pop-up drain is relatively simple to install.

• Place plumber's putty in the groove just underneath the chrome framing to provide a tight seal (see image).
• Insert the shanks of the lavatory faucet into the holes of the lavatory. Attach the locknuts and the washer to the shank and tighten them firmly into place.
• Remove any excess putty from the base of the faucet. Connect the shank to the water supply and tighten.

Installing the 4" lavatory faucet with pop-up drain is more challenging. Start by carefully reading the instructions that came with the faucet.

• First, remove the old faucet and pop-up drain.
• Insert the new faucet into position. Add putty in the groove around the base of the faucet.
• Slip the washer over the shank and thread the locknut up the shank, placing the faucet loosely in position.
• Insert the drain plunger into the center hole and affix the adjustment bar to the drain plunger.
• Place the pop-up drain body in position and attach it to the adjustment bar. Tighten all nuts and attach the faucet to the water system. Attach the pop-up drain body to the drain system.
• Place the stopper in the drain body and work the drain plunger. Make any adjustments by moving the lever assembly up or down in the holes provided.

Installing the combination lavatory faucet with pop-up drain is much the same as the 4" lavatory faucet.

• The main difference in this installation is that most models require the faucet handles, flanges and faucets to be removed. The assembly is then inserted from underneath the lavatory frame.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

This is a good idea to keep moisture from getting under the faucet and into the cabinet below.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

It is sealing putty used for a variety of tasks including to seal basket strainers, garbage disposal rims and tub drains.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.

No, you will need to bring in their old seat to match up with the new one. Each brand has its own design and thread. Be sure to remove your old seat with the proper tools.

Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document.