I need to restore woodwork with contoured surfaces, what tool should I use?

RELATED HELP CONTENT

• How do I select the right weatherstripping for my doors and windows? How do I install weatherstripping?
• How do I winterize my home?
• How do I replace the screening in my door or window?
• I have a door that is sticking. What can I do?
• Door Jamb Weatherstripping
• Can I re-key my own lock?
• How do I re-key my Kwikset Smartkey lock?
• How can I protect against lock bumping?
• How do I install a door sweep?
• How to install "shrink and seal" all around your house
• I have miss-drilled the hole for my doorknob. Is there anything I can do to cover this mistake?
• 15 Easy Ways to Go Green
• Can I replace the spring on my garage door?
• I need to adhere two pieces of lumber. What’s the best way to do that?
• How do I install door hinges?
• Tips to Tighten Up Your Home's Security
• What is the difference between a single-cylinder and a double-cylinder deadbolt?
• How do I replace a garage door spring?
• Do I need a deadbolt?
• Prepping Your Home for the Selling Season: Smart Ideas for Securing that Sold Sign
• I have small children. Will this garage door opener stop if they get in the way?
• Will this handle fit my sliding glass door?
• How do I know which latch fits my storm door?
• What kind of casement window operator will work on my window?
• What is the best product to weatherproof my door?
• What are glaziers points and glazing compound?
• Give Your Home a Facelift by Enhancing Your Front Entrance
• How do I install a new threshold?
• I need to buy a chisel for a woodworking job. What size do you recommend?
• What can I do to add security to my door?
• Which spring fits my garage door?
• Is there a product that makes installing a strike plate easier?
• Can I leave my window partially open and still have it locked?
• Will any lock fit my door?
• I have a hole in my screen. Can I repair it or do I need to replace it?
• My door is rubbing the frame at the top. What should I do?
• How do I replace the glass in a storm window?
• Weather Stripping a Window
• Should I use fiberglass or aluminum screening?
• What is the easiest way to shut out cold air coming in around my aluminum door?
• Do you have a hinge that will fit my door?
• 10 Ways to Save Energy
• Will a door closer work on my heavy storm door?
• How do I replace the screening in my window/door?
• Which drill driver would be best?
• What is an effective drill driver?
• What is the best brand of tools?
• Where can I find a tool that does multiple things?
• What's the best way to hammer in tight spaces?
• Is there a tool that can do everything?
• How can I fix my power tools?
• Which tools are the best investment?
• How do I remove rust from my garden furniture?
• How can I remove rust from my garden tools?
• Is there an easy way to miter baseboards?
• How can I restore a sharp edge to my garden tools?
• How can I cut chain?
• Is there an easy way to cut gutter materials?
• How can I cut pipe in a tight area?
• I need to replace flooring in a tight area and need to remove the old flooring. What tool should I use?
• Milwaukee M18 Compact Drill Driver
• Milwaukee M12 Cordless Hackzall
• Milwaukee M12 Screwdriver
• Dremel 4000 Rotary Tool
• I need to sand down some wood furniture with tight corners.
• How can I cope baseboard trim corners?
• Is there a power tool that I can use to remove grout?
• How do I use and maintain my chainsaw?
• Need to drive a nail in tight spaces or overhead where clearance and ergonomics work against you?
• Is there a multi-purpose Craftsman tool that can cut, sand, grind and more?
• I need a powerful impact driver I can use in tight spaces.
• Alligator Looper
• Is there a small power saw that is good for lighter work?
• What's an auger bit used for?
• If I buy a cordless drill, what volt model should I buy?
• What is a saber saw?
• What type of drill do you recommend for do-it-yourself projects?
• When buying a trimmer or edger, should I buy gas-powered or electric models?
• Are staples interchangeable with different staplers?
• How can I anchor something to concrete?
• What is the difference between an orbital sander and a random orbital sander?
• What are other features that I should look for on a circular saw?
• What type of drill bit should I use for cutting a large hole for a new door lock?
• How do you recognize a quality circular saw?
• I am trying to decide which is better for me - a gas or electric chain saw.
• What factors are important when choosing a reciprocating saw?
• What drill bit should I use?
• Can I use my circular saw to cut masonry?
• What type of drill do you recommend for do-it-yourself projects?
• How do you make miter cuts?
• What types of power sanders are there?
• What does the amp rating mean on power tools?
• What are the advantages of a finish sander?
• I need to make an accurate cut with a circular saw, but it is difficult to keep straight.
• My saber saw blades seem to dull quickly.
• What's an auger bit used for?
• What do the teeth-per-inch numbers mean on sawblades?
• What all-around circular saw do you recommend?
• Can I drill a hole in concrete?
• I'm drilling in some wood, where I will probably hit some hidden nails. What bit should I use?
• What’s the best way to cut a circle into wood?
• I have accidentally gouged some wood with my random orbital sander.
• What type of blade is designed to cut along the wood grain?
• What kind of blade should I buy for my circular saw? What tooth count is appropriate?
• What is a worm drive circular saw?
• Isn't a belt sander the best choice for removing a lot of material?
• What type of blade should I use when I am cutting wood across the grain?
• Do I need to buy both a crosscut and rip blade?
• What can I cut with a circular saw?
• Which type of sander do you recommend?
• What should I look for when buying a saber saw?
• What is the best way to drill into glass and ceramic tile?
• I need to drill a 1-inch hole in a piece of wood. What bit do I need?
• What drill bits do you recommend for general use?
• What's the advantage of a carbide-tipped circular saw blade?
• Do I need a special blade to cut plywood with my circular saw?