Light Switch Covers

  1. Cover working surface using a large cloth or newspaper
  2. Clean the covers thoroughly with soapy water and let dry
  3. Shake the Rust-Oleum Universal Paint and Primer can for one minute after mixing ball begins to rattle.
  4. Slide off the red safety clip from the trigger
  5. Test paint in an inconspicuous area first to ensure desired results.
  6. Hold the can 8-12 inches from the cover’s surface. Use a steady, continuous back-and-forth motion at a moderate speed to apply one heavy, even coat

View the original project here.

Check your state and local codes before starting any project. Follow all safety precautions. Every effort has been made to ensure the accuracy and safety of this information. Neither Westlake nor any contributor can be held responsible for damages or injuries resulting from the use of the information in this document.

What's on Sale

What's on Sale

Find out what's on sale at your local Westlake.

See Ads & Specials »

Panel of Pros

Panel of Pros

Get helpful advice and tips from our panel of pros.

VIEW TIPS »