I need a more efficient wrench

• Tweet

RELATED HELP CONTENT

• Alligator Looper
• Bostitch Twin Blade Utility Knife
• Dremel 4000 Rotary Tool
• How can I cope baseboard trim corners?
• How can I cut chain?
• How can I cut pipe in a tight area?
• How can I fix my power tools?
• How can I remove rust from my garden tools?
• How can I restore a sharp edge to my garden tools?
• How do I remove rust from my garden furniture?
• How do I use and maintain my chainsaw?
• I have a door that is sticking. What can I do?
• I need a more efficient wrench
• I need a powerful impact driver I can use in tight spaces.
• I need to replace flooring in a tight area and need to remove the old flooring. What tool should I use?
• I need to restore woodwork with contoured surfaces, what tool should I use?
• I need to sand down some wood furniture with tight corners.
• Is there a multi-purpose Craftsman tool that can cut, sand, grind and more?
• Is there a power tool that I can use to remove grout?
• Is there a tool that can do everything?
• Is there an easy way to cut gutter materials?
• Is there an easy way to miter baseboards?
• Milwaukee M12 Cordless Hackzall
• Milwaukee M12 Screwdriver
• Milwaukee M18 Compact Drill Driver
• Need to drive a nail in tight spaces or overhead where clearance and ergonomics work against you?
• Ready Wrench
• What are some good tools to start with?
• What is an effective drill driver?
• What is the best brand of tools?
• What's the best way to hammer in tight spaces?
• What's the best way to level while laying out my wall?
• Where can I find a tool that does multiple things?
• Where can I get a good tool set for car-care?
• Where can I get a good wrench set?
• Which drill driver would be best?
• Which hand tools should I stock up on?
• Which tools are the best investment?

• Are more teeth per inch better when buying a crosscut handsaw?
• Are staples interchangeable with different staplers?
• Are there tree-trimmers you can use from the ground?
• Can hacksaws cut other materials besides metal?
• Can I drill a hole in concrete?
• Can I use my circular saw to cut masonry?
• Do I need a special blade to cut plywood with my circular saw?
• Do I need more than one Phillips head screwdriver?
• Do I need to buy both a crosscut and rip blade?
• Do I need to worry about what size straight-slot screwdriver to buy?
• Do you have a good tool to cut chicken wire with?
• Do you have a tool for cutting lightweight metal sheeting?
• Does the number of points on a blade also apply to hacksaws?
• How do I get a bolt out if the head has broken off?
• How do I know if my level is accurate?
• How do I select the right screw for my project?
• How do you make miter cuts?
• How do you recognize a quality circular saw?
• How long a tape measure should I buy?
• How many Philips head screwdrivers do I need?
• How should I cut plastic pipe?
• I am trying to decide which is better for me - a gas or electric chain saw.
• I don't have enough room under my sink to get the faucet nut off.
• I have a screw that has broken off. How do I remove it?
• I have accidentally gouged some wood with my random orbital sander.
• I need a hex key wrench, but I don't know the size.
• I need a pair of pliers that I can use in tight quarters.
• I need to buy a chisel for a woodworking job. What size do you recommend?
• I need to drill a 1-inch hole in a piece of wood. What bit do I need?
• I need to make an accurate cut with a circular saw, but it is difficult to keep straight.
• I want a hand saw for all-around use. What do you recommend?
• I want a hand tool to cut a rather intricate design in plywood.
• I want to cut some lightweight sheet metal. Which hacksaw blade should I use?
• I want to hide the nail head in some molding that I am installing.
• I want to pound a chair leg back into place. What tool can provide the force without marring the surface?
• I'm drilling in some wood, where I will probably hit some hidden nails. What bit should I use?
• I'm looking to put together a basic hand tool set. What do I need?
• If I buy a cordless drill, what volt model should I buy?
• Is there a power tool that I can use to trim evergreens with?
• Is there a small power saw that is good for lighter work?
• Is there a tool for removing the outer sheathing on cables such as Romax?
• Is there a wrench I can use that will not damage the brass, aluminum or other soft material?
• Isn't a belt sander the best choice for removing a lot of material?
• My saber saw blades seem to dull quickly.
• The staples I am using do not go far enough into the wood?
• What all-around circular saw do you recommend?
• What are other features that I should look for on a circular saw?
• What are the advantages of a finish sander?
• What are the advantages of locking pliers?
• What are the quality differences between drop forged and cast metal hand tools?
• What can I cut with a circular saw?
• What do I need to buy for a basic electrical tool kit?
• What do I need to cut a hole in my wall for a new electrical box?
• What do the teeth-per-inch numbers mean on sawblades?
• What does the amp rating mean on power tools?
• What drill bit should I use?
• What drill bits do you recommend for general use?
• What else should I consider when buying staples?
• What factors are important when choosing a reciprocating saw?
• What hammer do you recommend for general use around the house?
• What is a saber saw?
• What is a worm drive circular saw?
• What is the advantage of composite handles on an ax or maul?
• What is the best way to cut laminate flooring?
• What is the best way to drill into glass and ceramic tile?
• What is the difference between an orbital sander and a random orbital sander?
• What kind of blade should I buy for my circular saw? What tooth count is appropriate?
• What kind of saw do I need to cut a hole in my wall for a new electrical box?
• What should I look for when buying a saber saw?
• What size adjustable wrench should I buy for general use?
• What tool should I use to strip the plastic sheathing off wire?
• What type of blade is designed to cut along the wood grain?
• What type of blade should I use when I am cutting wood across the grain?
• What type of drill bit should I use for cutting a large hole for a new door lock?
• What type of drill do you recommend for do-it-yourself projects?
• What type of handsaw blade should I use to cut paneling?
• What type of level should I buy?
• What type of pliers should I buy for general use?
• What types of power sanders are there?
• What weight hammer should I buy?
• What's an auger bit used for?
• What's the advantage of a carbide-tipped circular saw blade?
• What's the best way to sand?
• What's the difference between a putty knife and a paint scraper?
• What's the difference between a rip hammer and a curved claw hammer?
• What’s the best hammer to use with a chisel?
• What’s the best hand tool to cut a design in plywood?
• What’s the best way to cut a circle into wood?
• When buying a trimmer or edger, should I buy gas-powered or electric models?
• Which is better, an electric or gas leaf blower?
• Which is better: wood or fiberglass handles on hammers?
• Why is there such a wide price range for claw hammers?